Activated Alumina: Fluoride Removal Water Inline Filter for Drinking Water Filtration Systems

Description

Fluoride Removal Water Inline Filter

• Standard 2″ x 10″ inline fluoride filter cartridge.
• Reduces fluoride to less than 0.5 ppm.
• Includes a fine-mesh pre-resin layer for treating fluoride in untreated water source.
• This media cartridge is a high capacity synthetic absorbent media (Synthetic Aluminum Oxide, also known as Activated Alumina), which is highly selective for Fluoride, Arsenic and Lead.
• Removes contaminants through adsorption and chemical reaction.
• Manufactured to limit fines and unwanted particles.
• It has the same particle size as ion exchange resin.

*For best results, do not exceed recommended flow rates and pH limits or conditions:
For influent streams above 100 ppm hardness, reduce cartridge fluoride removal capacity by 50%, Above 200 ppm, reduce capacity by 75%.

Filter media is locally manufactured (California, USA) and certified to NSF Standard 61.

This fluoride filter cartridge relies on precise contact time for effective contaminant reduction. While the unit supports a maximum flow of 2.5 GPM, maintaining a rate of 0.5 GPM ensures superior results. Higher velocities directly reduce the volume of fluoride removed.

Key Technical Specifications:

• Total Capacity (<100 ppm hardness): 4,500 ppm, typically treating 1,000 – 1,500 gallons
• Nominal Design Flow: 0.25 GPM
• Optimal Operation: pH 5 within a 4 – 10 range
• Max Temperature: 100°F (38°C)
• Minimum Temperature: 40°F (5°C)
• Max Pressure: 125 PSI (8.6 bar)
• Minimum Pressure: 20 PSI (1.4 bar)
• Micron Rating: 25 Nominal
• Filter Dimensions: 10 x 2.5″ inches
• Cartridge Life: 1 Year